宿州冷庫淮海經濟區**，引領冷鏈物流的發展
發布時間：2017-04-02 09:14:23瀏覽次數：4260
宿州冷庫設計安裝哪家強？
1、冷庫設計安裝前的地面或墻體要做一些處理，地面或墻體要能夠承受機組的重量自振動。
1, refrigerator design before the installation of floor or wall to do some processing, floor or wall to be able to sustain the weight of the unit vibration.
2、冷庫設計安裝的部位要方便操作、以及日后的維修、調整。
2, the parts of the refrigerator design and installation more convenient operation, and maintenance and adjustment in the future.
3、嚴格挑選機組外機的安裝地點，機組外機在運轉時發生的噪音以及冷（熱）風，冷凝水不影響周邊人們的工作、學習和生活，所以要謹慎選擇。
3, selected units outside the machine installation site, and noise occurs when the operation of the unit outside the machine and wind cold (hot), condensed water does not affect the surrounding people''s work, study and life, so be careful to choose.
4、從安全生產方面考慮，外機組周圍不能有可熱性氣體泄漏或者爆炸物。
4, from the production safety into consideration, there be no crew can hot gas leakage or explosives.
5、冷庫設計時，外機盡量安裝在背明的地方。
5, cold storage design, outside the machine install where Ming back as far as possible.
室內機組安裝位置要注意避免太陽直接照射在機組上，遠離熱源；冷庫內機組的進出風口處，不應設障礙物。
Indoor installation position, should pay attention to prevent sun direct illuminate on the unit, away from heat source; Inside of the unit in and out of the refrigerator FengKouChu and should not be set obstacles.
在測量方面，首先要測量內外機組之間的距離。內外機組之間的距離應小于5米，如果大于5米的話，應準備新的銅管連接；然后測量內、外機組之間的位差，內外機組之間的距離要小于3米，否則會降低冷庫機組的制冷能力，從而增大壓縮機組負荷，引起過載保護。
In terms of measurement, the first thing to measure the distance between the inside and outside the unit. The distance between the inside and outside the unit should be less than 5 meters, if greater than 5 m, should prepare new brass connection; And then measuring the potential difference between the internal and external unit, the distance between the inside and outside the unit less than 3 m, otherwise it will reduce the cold storage refrigeration capacity of the unit, so as to increase the compression load and overload protection. 本文為宿州冷庫原創，轉載請注明：http://www.w8xq.com！謝謝。
掃一掃 關注我們
